VpCI®-705 provides excellent corrosion protection for all common engineering metals used in automotive fuel systems including aluminum, aluminum die cast and zinc die cast alloys, tinplate, copper, ferrous alloys, cast iron, and solder.

VpCI®-705 provides corrosion protection in gas/gas condensate transmission lines and collectors even in the presence of aggressive contaminants such as electrolytes, hydrogen sulfide and carbon dioxide. VpCI®-705 provides excellent protection in both continuous and intermittent treatment.

This product gives unique multi-metal corrosion protection in all phases: liquid, interface, and vapor phases. Furthermore, due to its tenacious film-forming properties, VpCI®-705 even provides corrosion protection to non-metallics; i.e. rubber gaskets, seals and plastics against oxidation, cracking, and aging.

TYPICAL APPLICATIONS
•Fuel tanks
•Carburetors
•Fuel pumps
•Upper engine cylinder components
•Natural gas/gas condensate sales lines and collectors

ADVANTAGES
May be used in operation and storage
•Blends with gasoline
•Protects all metals including tinplate, solder, copper, aluminum, steel, and brass
•Protects upper cylinder walls, piston heads, and rings during shutdown
•Good low temperature fluidity and relatively high flashpoint permitting ease and safety of application
•Provides protection in liquid and vapor phase and at liquid/air interface
•Passes Rust test in accordance to MIL-PRF-25017G, category 1
•Passes Rust test in accordance to ASTM D 665-92
•Liquid, easy to blend
•Fuel stabilizer allows better engine performance
•Does not contain trace metals, chlorides, chromates, nitrites, or phosphates
•Does not form corrosive products
•Displaces water in contact with tank walls and fuel lines
•Can be fogged into gas tanks
•General Motors Corporation Approved Part No 10661800
•EPA (Environmental Protection Agency) Identification #1733-0002

APPLICATIONS
In-use gasoline tanks:
Add VpCI®-705 to gasoline or diesel fuel, fuel blending and storage facilities, or directly to fuel tanks.
Dosage: 0.1 - 0.15% per volume of tank to be protected.

Storage and shipment of dry fuel tanks:
Fog VpCI®-705 concentrate into tank covering as much internal surface area as possible.
Dosage: 1.5 oz. per 10 U.S. gallons tank volume (45 ml per 37 liters of tank volume.)

Sales Gas and Gas-Condensate lines:
Inject VpCI®-705 at the dosage rate of 1/4 to 1/2 pint per million cubic feet of gas.

Treatment of liquid gas tanks:

Treatment ranges from 100-200 ppm and depends on liquid gas chemistry and CO₂/H₂S content.

PHYSICAL PROPERTIES

STANDARD TEST METHODS

PACKAGING