VpCI®-379 is designed as a complete replacement for oil-based preventives. The wide  dilution  range  (between 5% and 50%) allows flexibility to customize the length of protection required versus applied cost per  square  foot  (or m2). VpCI®-379 is readily soluble and forms a clear solution in water. It  is  applied to metal surfaces by spraying or dipping. The protective coating is clear and will dry at ambient conditions to become dry-to-touch 30 minutes after application. VpCI®-379 can be removed with conventional alkaline cleaners, and can be coated over with paints and primers without removal.

PACKAGING & STORAGE
VpCI®-379 is available in 5 gallon (19 L) pails, 55 gallon (208 L) drums, liquid totes, and bulk.
To ensure best product performance, store in original packaging, indoors, and out of direct sunlight at 40-100 °F (4-38 °C).

Shelf life: 2 years

FEATURES
•Water-soluble
•Superior protection against humidity
•Eliminates cleaning and housekeeping problems associated with oils
•Economical, can be diluted up to 1 part VpCI®-379 to 20 parts water
•Easy to remove, if necessary, or paintable with common coatings
•NSN 8030-01-481-8928
•Unique vapor phase action also protects uncoated and difficult-to-reach areas
•UFI: 35TX-S1PF-3U1S-3MH1

TYPICAL APPLICATIONS
•Casted forgings, tubular parts, machined, and honed metal components
•Gears, pumps, electric motors, housings, textile, and printing equipment
•Precision machined parts, structural steel, sintered metals, bars, and roll stock
•Additive to parts washers and rinse water systems, hydroblasting, and hydrotesting Add VpCI®-379 to water as follows for:
Short term protection:
1 part concentrate to 10-20 parts water

Medium term protection:
1 part concentrate to 6-10 parts water

Protection up to 2 years:
1 part concentrate to 1-5 parts water

If removal is necessary for subsequent operations such as plating, the usual prepa- ratory operations of alkaline washing or degreasing easily removes the coating. In many operations, removal is not necessary since coatings, or paints can be applied directly over treated surfaces at dilutions over 1:5.

TYPICAL PROPERTIES

METALS PROTECTED
•Carbon Steel
•Stainless Steel
•Aluminum
•Cast Iron
•Copper

STANDARD TEST METHODS